Lowering your Explorer makes a fantastic improvement in handling by lowering the chassis roll center. Not to mention a tough look. Ride height is lowered approximately 1 3/8 inches. Chassis components still operate within their stock parameters, so there is no unusual wear or stress. Kit is easy to install. Includes aluminum lowering blocks, special u-bolts, front camber adjusters and detailed instructions. Front end alignment will be required after installation. Note: 95-00 2-door Sports with single leaf spring suspension do not require blocks at the rear. These vehicles can be lowered by changing the location of the stock spacer plates. Fits 95-01 4 Door / 95-03 Sport
The original Sport Trac uses the same lowering kit as the Explorer up to the 02/02 production date. Ford made a few changes starting in 03/02. The front hardware is slightly different. We have included the required pieces in the new kit. The rear suspension travel is also different on the late 02 & 03 models. The later kit comes with 3" lowering blocks. If you own a 2002 Sport Trac, please check your production date prior to ordering. Fits 01-04 Sport Trac
2002-2004 Explorer 4 Door
The most economic way to lower your third generation Explorer is to install the Ground Force lowering Springs. These springs are compatible with the factory shocks. Ride height is lowered approximately 1.6 inches. Four wheel alignment is required after the installation of the lowering springs. The required camber adjustment hardware is included with the kit. Fits 02-04 4-door
X-Spec Suspension | X-Charger Superchargers | New Stuff | Specials/Closeouts
Road Tests/Press Reviews | Common Questions | Explorer Gallery
Our Commitment | Ordering Info | Contact Us
Copyright © 1999-2003 Explorer Express. All rights reserved.
Explorer Express is a registered trademark and subsidiary of Z DOCTOR INC.
Explorer Express is not related in any way to the Ford Motor Company.
The words "Ford" and "Explorer" are trademarks of the Ford Motor Company and are used for descriptive purposes only.
Please direct questions or comments to Customer Service.